Draytek VigorSwitch P1085, Руководство пользователя, Страница: 238 / 267

VigorSwitch P1085 User’s Guide 230
spanning-tree priority
spanning-tree tx-hold-count
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
Syntax Items Description
spanning-tree Enable the function of spanning-tree.
Related Syntax:
 <config># spanning-tree
spanning-tree bpdu Filter/flood the BPDU packets.
<filtering> - Packets will be filtered when STP is disabled on
specified interface.
<flooding> - Packets will be flooded to all interfaces with STP
disabled and flooding mode.
Related Syntax:

<config># spanning-tree bpdu<filtering/flooding>
spanning-tree forward-delay Set the STP forward delay time.
<4-30> - Default value is 15 (seconds).
Related Syntax:

<config># spanning-tree forward-delay <4-30>
spanning-tree hello-time Set the hello time interval to broadcast the message to other
bridges.
<1-10> - Default value is 2 (seconds).
Related Syntax:
 <config># spanning-tree hello-time <1-10>
spanning-tree maximum-age Set the time interval for VigorSwitch to wait without receiving the
configuration message.
<6-40> - Default value is 20 (seconds).
Related Syntax:

<config># spanning-tree maximum-age <6-40>
spanning-tree pathcost Set the path-cost method for spanning tree.
<long/short> - Long means the path cost ranging from 1 to
200000000; short means the path cost ranging from 1 to 65535.
Related Syntax:
 <config># spanning-tree pathcost method <long/short>
spanning-tree priority Set the priority for the specified instance ID.
<0-61440> - The number must be multiple of 4096.
Related Syntax:
 <config># spanning-tree priority <0-61440>
spanning-tree tx-hold-count Set the maximum number of packets transmission per second.
<1-10> - Valid range is from 1 to 10.
Related Syntax:
 <config># spanning-tree tx-hold-count <1-10>
E
E
x
x
a
a
m
m
p
p
l
l
e
e
P1085# configure
P1085(config)#
P1085(config)# spanning-tree forward-delay 20