Draytek VIGOR3220 SERIES, Руководство пользователя

Страница: 72 / 742

Vigor3220 Series User’s Guide 60
I I I I - - 1 1 - - 2 2 - - 3 3 D D e e t t a a i i l l s s P P a a g g e e f f o o r r P P P P T T P P / / L L 2 2 T T P P i i n n E E t t h h e e r r e e n n e e t t W W A A N N
To use PPTP/L2TP as the accessing protocol of the internet, please click the PPTP/L2TP tab.
The following web page will be shown.
Available settings are explained as follows:
Item Description
PPTP/L2TP Enable PPTP- Click this radio button to enable a PPTP client
to establish a tunnel to a DSL modem on the WAN interface.
Enable L2TP - Click this radio button to enable a L2TP client
to establish a tunnel to a DSL modem on the WAN interface.
Disable – Click this radio button to close the connection
through PPTP or L2TP.
Server Address - Specify the IP address of the PPTP/L2TP
server if you enable PPTP/L2TP client mode.
Specify Gateway IP Address – Specify the gateway IP address
for DHCP server.
ISP Access Setup Username -Type in the username provided by ISP in this
field. The maximum length of the user name you can set is 63
characters.
Password -Type in the password provided by ISP in this field.
The maximum length of the password you can set is 62
characters.
Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Application >> Schedule web page and you can
use the number that you have set in that web page.
MTU It means Max Transmit Unit for packet.
PPP Setup PPP Authentication - Select PAP only or PAP or CHAP for
PPP.
Idle Timeout - Set the timeout for breaking down the
Internet after passing through the time without any action.
IP Address Assignment
Method(IPCP) WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use