Dräger Polytron 8100, Инструкция по эксплуатации, Страница: 34 / 254

34 Dräger Polytron 8100
Maintenance
6.3.2 Warning reference
Warning
number
Cause Remedy
#101 Data-logger in Stack mode is 100 % full and
is not logging any more data. Download the data, clear the data-logger.
#102 Data-logger in Stack mode is 90 % full. Download the data as soon as possible and clear the data-
logger.
#103
#106 Data error in the instrument. Some functions
like data-logger, sensor test, etc. may no
longer be available. Reset the instrument to factory default settings (see Section 7
on Page 36).
If this error occurs again:
Have the instrument checked by DrägerService.
#104 Date or time setting not valid. Set date and time (see Section 5.8.3 on Page 22).
#107 Battery for data memory empty. Have the instrument checked by DrägerService.
#110
#111
#112 SW dongle has been removed without being
deactivated. Deactivate SW dongle (see Section 5.11 on Page 29).
#113 Alarms inhibited. Enable alarms (see Section 5.8.1 on Page 21).
#164
#165 Sensor warm-up phase has not ended.
Increased measurement error must be
expected. Wait until the sensor has warmed up. Do not calibrate before
sensor is fully warmed-up.
#167
#170 Calibration interval expired. Recalibrate the instrument (see Section 6.2 on Page 30).
#171 Negative reading. Value below range
minimum. Recalibrate zero point.