Dräger Multi-PID 2, Руководство пользователя

Страница: 68 / 107

68
Menu Functions
or
3. Use the "
l
" key to select the memory slot, then press " edit " to
change the values for RRF, STEL, TWA, REAL and FWt.
4. Press " edit " , then highlight either Name, RRF, STEL, TWA,
REAL or FWt using the "
l
" key, then press " select " .
5. Use the "
q
" "
l
" and "
j
" keys to enter the desired number.
6. Highlight the "
n
" checkmark, then press " done " .
7. Press the " done " key to return to the main display or press
" select " to edit another value.
8. To return to the main menu, press " select " , then " done " .
To select a pre-programmed compound stored in the Multi-PID 2’s
Preset RRF library:
1. Press
" menu " , then use the "
l
" key to highlight " Memory
Slots " , then press " select " .
2. Use the "
l
" key to select the memory slot, then press " edit " to
display the memory slot contents.
3. Press " preset " .
4. Use the "
l
" key to choose the alpha range of the compound of
interest, then press the " select " key.
6. Choose the compound of interest using the "
l
" key and press
the " select " key.
7. Press the " back " key to accept the choice or press " edit " to
modify the preset values for RRF, STEL, TWA, REAL and FWt as
shown above.
Data Log Options Menu
The " Data Log Options " function can be used for the following func-
tions:
" Clear data log " , " Edit interval " (only in TVOC mode) and
" Download to PC " .
NOTE:
If a target gas calibration is required, a new storage location
with a response factor of 1 has to be created. It should be noted
that all storage places are calibrated simultaniously. In the case
of a target gas calibration, only the created storage place
should be used. Please refer also to chapter “Calibration Techni-
cal Description” on page 72.