Dräger Multi-PID 2 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 107

background image

51

Connecting Accessories

7. It is normal for a fully charged battery pack to indicate it is charging

(red light) when first plugged in. The LED will turn green within a
few minutes to indicate the battery is fully charged.

8. When the battery pack is fully charged, remove the AC adapter,

first from the wall outlet, then from the off line charger.

9. Remove the battery pack connector from the socket on the off-line

charger.

10. Replace the battery pack in the Multi-PID 2 as outlined in Remo-

ving and Replacing the Battery Pack on page 26.

You can keep the battery pack fully charged indeﬁnitely, without over-
charging it, by leaving it connected to the off-line charger while the
charger is operating.

Charging from a DC Source

To re-charge your battery pack:
1. Remove the battery pack as outlined in Removing and Replacing

the Battery Pack on page 26.

2. Attach the connector from the battery pack to the socket on the off-

line charger.

3. Plug the DC power cord into the jack on the opposite face of the

off-line charger.

4. Plug the DC power cord into a vehicle auxiliary 12 VDC or cigaret-

te lighter socket.

5. The LED on the upper face of the off line charger indicates the

charge state of the battery pack. Red indicates the battery is being
charged. Green indicates the battery is fully charged.

6. Charging a fully discharged battery pack will take approximately 4

hours.

7. It is normal for a fully charged battery pack to indicate it is charging

(red light) when first plugged in. The LED will turn green within a
few minutes to indicate the battery is fully charged.

8. When the battery pack is fully charged, remove the DC power

cord, first from the vehicle auxiliary 12 VDC or cigarette lighter
socket, then from the off-line charger.

9. Remove the battery pack connector from the socket on the off-line

charger.

10. Replace the battery pack in the Multi-PID 2 as outlined in Battery

Charging on page 26.

You can keep the battery pack fully charged indeﬁnitely, without over-
charging it, by leaving it connected to the off line charger while the
charger is operating.

NOTE:
The connector is polarized. It will only fit one way. Do not force
the connection.

«
...
49
50
51
52
53
...
»

Содержание Multi-PID 2












































































































Отзывы:

Нет отзывов

Похожие инструкции для Multi-PID 2

Бренд: Icare Страницы: 3

Бренд: Omicron Lab Страницы: 33

Бренд: Omicron Lab Страницы: 21

Бренд: Omicron Lab Страницы: 22

Бренд: Vectornav Страницы: 114

Бренд: Abus Страницы: 168

Бренд: OHAUS Страницы: 76

Бренд: OBDPROG Страницы: 8

Бренд: Teledyne Hastings Instruments Страницы: 54

Бренд: YOSensi Страницы: 27

Бренд: BYOGuitar.com Страницы: 11

Бренд: Siko Страницы: 2

Бренд: DODODUCK Страницы: 2

Бренд: Spasciani Страницы: 26

Бренд: King Instrument Страницы: 5

Бренд: Danfoss Страницы: 16

Бренд: Ibravebox Страницы: 32

Бренд: Parkside Страницы: 199

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды