Dräger Multi-PID 2, Руководство пользователя

Страница: 50 / 107

50
Connecting Accessories
Off-Line Charger
General Information
The off-line charger (Part No. 64 05 404) allows you to charge a bat-
tery pack independently of the Multi-PID 2. To charge a battery pack
without removing it from the Multi-PID 2, see Battery Charging on
page 26.
The off-line charger requires one of the following the Multi-PID 2
accessories for operation:
Use only the AC adapter specified for use with the Multi-PID 2. Using
another AC adapter will result in damage to the battery pack, the off-
line charger, or the adapter.
Charging from an AC Source
To re-charge your battery pack:
1. Remove the battery pack as outlined in Battery Charging on page
26.
2. Attach the connector from the battery pack to the socket on the off
line charger.
3. Plug the AC adapter into the jack on the opposite face of the off-
line charger.
4. Plug the AC adapter into an AC outlet. If you are using the Euro-
pean AC adapter, ensure the correct plug is installed on the line
cord. If it is not correct for the wall outlet in your area, then it must
be replaced.
5. The LED on the upper face of the off-line charger indicates the
charge state of the battery pack. Red indicates the battery is being
charged. Green indicates the battery is fully charged.
6. Charging a fully discharged battery pack will take approximately
four hours.
AC Adapter Part No. 64 05 428 (North America)
AC Adapter Part No. 83 17 661 (Europe)
DC Power Cord Part No. 64 05 421
WARNING:
Do not charge the battery pack in a hazardous loca-
tion, danger of an explosion!
NOTE:
The connector is polarized. It will only fit one way. Do not force
the connection.