Dräger Multi-PID 2, Руководство пользователя

Страница: 36 / 107

36
Using the Multi-PID 2
Numeric Value, Duration, Time and Date Entry
In cases where the system requires the user to enter a number, dura-
tion, time, or date, the following mechanism is used. The number of
digits to be entered depends on the type of value being entered.
Upon entering a value entry screen, a bar icon below the left most
digit highlights it as the active digit. The arrows "
q
" (middle soft but-
ton) and "
l
" (left soft button) are used to increase/ decrease the
digit. The bar icon is moved to the next digit to the right using the "
j
"
soft button. Once the user has finished entering the value they use
the right soft button to move the bar icon to the far right to highlight
the OK check mark "
n
". When the bar is under the OK check mark
"
n
", the left soft button changes to » done « . The user is then able
to input the value. Pressing the right soft button while the OK check
mark "
n
" is highlighted will return the bar icon to the left most digit.
In some cases, units may be specified (e.g., ppm or hh:mm); in others
there may be no units.
No cancel option is available to the user. They must input a value.
0
1
223958_0
1_en.eps
alarm
Enter new PEAK:
j
j
j
alarm
Enter new PEAK:
j
j
j
alarm
done
Enter new PEAK:
j
alarm
Enter new PEAK:
j
j
j
2 4 2 5 4 2 5