Copyright © Dr Robot Inc. 2005
32
Connect Protocol
Protocol Select
TCP from the pull down menu.
Figure VI.6 TCP Connection Settings
3. In the available fields, enter the following information:
Connect Mode: Passive Connection
Accept Incoming
Select Yes to accept incoming connections.
Password Required
Determines whether a password is required for an incoming passive
connection. Field is not available when a password is set for Telnet mode.
Password
If Password Required was set to Yes, enter the password for passive
connections.
Connect Mode: Active Connection Port Settings
Active Connect
Select None to disable Active Connect. Otherwise, indicate the connection
type from the available list. Never Accept Incoming rejects all external
connection attempts. Accept with modem_control_in Active accepts
external connection requests only when the modem_control_in input is
asserted. Cannot be used with Modem Mode. Always Accept accepts any
incoming connection when a connection is not already established.
Start Character
If Active Connect is set to With Start Character, enter the start character in
