Copyright © Dr Robot Inc. 2005
26
VI.
Configuration using Web-Manager
This chapter describes how to configure the WFS802g using Web-Manager, DrRobot’s browser-based
configuration tool. The unit’s configuration is stored in nonvolatile memory and is retained without
power. The unit performs a reset after the configuration is changed and stored.
This chapter includes the following topics:
.
Accessing WFS802g using Web-Manager
.
Network Configuration
.
Server Configuration
.
Host List Configuration
.
Channel 1 and Channel 2 Configuration
.
WLAN Configuration
.
OEM Pin Configuration
.
Updating Settings
VI.1.
Accessing WFS802g using Web-Manager
Follow the instructions to configure the unit’s MAC address
1. U s i n g S e r i a l P o r t t o s e t t h e I P .
For more information on the
Serial Port Access
,
see “Server”
on page
6
.
2. Configure WLAN parameter.
For more information on the
Serial Port Access
, see
“WLAN”
on page
23
.
Figure VI.1 Web-Manager
The main menu is displayed in the left side of the Web-Manager window.
Note:
Alternatively, access the WFS802g’s Web-Manager if it is connected to the
network by entering its IP address in a web browser.
