Copyright © Dr Robot Inc. 2005
29
TCP Keepalive
TCP Keepalive time defines how many seconds the unit waits during an
inactive connection before checking its status. If the unit does not receive a
response, it drops that connection. Enter a value between 0 and 60
seconds. 0 disables keepalive.
VI.4.
Host List Configuration
The WFS802g scrolls through the host list until it connects to a device listed in the host list table. After
a successful connection, the unit stops trying to connect to any others. If this connection fails, the unit
continues to scroll through the table until the next successful connection.
The host list supports a minimum of 1 and a maximum of 12 entries. Each entry contains an IP
address and a port number.
Note:
The host list is disabled for Manual and Modem Mode. The unit will not accept a data
connection from a remote device when the hostlist option is enabled.
To configure the WFS802g’s host list:
1.
From the main menu, click the Hostlist tab.
Figure
VI.4
Hostlist
Settings
2. Enter or modify the following fields from the Hostlist Settings window:
Retry Settings
Retry Counter
Enter the value for the number of times the WFS802g should attempt to
retry connecting to the host list.
Retry Timeout
Enter the duration (in seconds) the WFS802g should abandon attempting a
connection to the host list.
Host Information
Host Address
Enter or modify the host’s IP address.
