Doro IP500PBXW, Руководство пользователя

Страница: 48 / 166

Administration Manual ip500pbxw – English
47
- For configuration via the ip520c interface, see page 123.
Paging
To make an announcement over the speakers of all ip520c phones
The 'Page All ip520c phones’ allows any station to make an announcement over the speakers of all ip520c phones. Only
ip520c phones that are page-protected will not be paged.
1. From the Idle Menu, press the Scroll Down Key ( Ô ) until
Page all keystations
is displayed and select.
2. Make your announcement.
From a standard telephone, the code is 795.
To make a call over the speaker of another ip520c
The Voice Call feature allows you to speak over the speaker of an individual ip520c. If the ip520c is page-protected the
voice call will fail.
1. From the Idle Menu, press the Scroll Down Key ( Ô ) until
Voice call
is displayed and select.
2. Select the station you wish to page.
3. Make your announcement.
From a standard telephone, the code is 715.
To answer a Voice Call at your station
- Press the Secrecy Key (
z
) and speak in Hands-free Mode, or pick up the handset.
To protect ip520c phones against Announcements and Voice Calls
- For configuration via the web interface, see page 78.
- For configuration via the ip520c interface, see page 123.
Outgoing VoIP Calls
In normal operation to make an outgoing call a line access code, 0 or 8, is dialled or a Line key is selected and the digits are
dialled. To make a call over an IP line the digit 8 must be dialled or an IP Line key selected.
This feature is used to program the system so that outgoing calls are sent over the IP Lines independently of the line
access code dialled or the line selected. It is also possible to select particular calls to go over IP lines.
For configuration via the web interface see page 86.
For configuration via the ip520c interface see page 124.
Least Cost Routing
You may use this feature to have users’ calls routed over specific lines, or over a specific Network Provider. To set the
feature up you associate input codes with the lines over which calls should be routed and with whatever network codes are
necessary to route the call.
In addition you can choose to route the calls over different lines at various times of the day for optimum call rates. Once the
facility is activated calls are automatically routed over the selected lines, and the network code is sent to the line before the
telephone number.
To set up codes to allow calls to be routed on specific lines or networks
- For configuration via the web interface, see page 87.
- For configuration via the ip520c interface, see page 124.
Least cost Routing activated automatically at set times
- For configuration via the web interface, see page 87.
- For configuration via the ip520c interface, see page 124.
Sending a Forward Recall while on call
A Forward Recall signal may be required if you are using certain network services on your PSTN lines, or if your system is
connected to another telephone system (PABX) via one of the line interfaces.