Doro IP500PBXW, Руководство пользователя

Страница: 126 / 166

Administration Manual ip500pbxw – English
125
- In the Output Code field, you insert whatever digits you want to be passed to the network. If no additional carrier
access codes are required then the Output Code should match the Input Code.
- Select
Preferred
or
Exclusive
.
- Select the line or lines the call is to be sent on.
Preferred means that if the selected line is not available the call will be sent over any available line without the output code.
If exclusive is selected the call will not be placed if the selected lines are busy.
When Enabling or Disabling the LCR feature the new setting does not take immediate affect. There can be a delay a of up
to 1 minute for the setting to take affect.
LCR Timebands
You can programme the Least Cost Routing facility, to be automatically turned on and off twice during a 24-hour period
enabling you to tailor your call charges through different service providers.
Select Outgoing VoIP Calls
- Select LCR
- Select LCR Timebands
- Select LCR on times
- You can enter two 'On' times.
- Select LCR off Times
- You can enter two times at which the LCR facility is deactivated
A Third option 'LCR weekend' is offered. When this is selected the LCR service remains active from Friday night to Monday
morning; all off times over the weekend are ignored.
Press the Hands-free Key to finish programming.
To examine Station Lock Passwords
1. From the Programming Station, press
2. Press the Scroll Down Key ( Ô ) until
System programming
is displayed and select.
3. Enter the System Programming Password and select
Stations
.
4. Select
Examine passwords
5. Select
Ext. lock password
.
6. Select the station. The Lock Password is briefly displayed on the top line of the display.
Press the Hands-free Key to finish programming.
Call Waiting Tone Protection
Stations may present a busy station with a Call Waiting tone, provided the busy station is not protected against receiving
Call Waiting tones. By default, all stations are protected against receiving Call Waiting tones. However, you may program
stations to receive Call Waiting tones.
To program a station to receive Call Waiting tones
1. From the Programming Station, press
2. Press the Scroll Down Key ( Ô ) until
System programming
is displayed and select.
3. Enter the System Programming Password and select
Stations
.
4. Press the Scroll Down Key ( Ô ) until
Tone protection
is displayed.
5. Select the Stations you wish to allow receive Call Waiting tones. A ◊ is displayed beside those stations allowed
to receive Call Waiting tones, and a
♦
is displayed beside those stations protected against receiving Call
Waiting tones. (By default, all stations will have a
♦
displayed).
Press the Hands-free Key to finish programming.
To protect an individual call from Call Waiting tones
If your station can receive Call Waiting tones, you may protect each call on an individual basis from interruption.
When you are on a call, select
Tone protect
on the display.
From a standard telephone, the code is Forward Recall 725.