Doosan DX35Z, Руководство по эксплуатации и обслуживанию

Страница: 71 / 211

OP000469
2-11
Operating Controls
8. Windshield Washer Switch (Optional)
While the windshield wiper is running, depress the
washer switch to spray windshield washer fluid onto the
windshield. Use only the proper windshield washer fluid
in the system.
O. In this position, the washer is "OFF."
I. In this position, the windshield washer sprays
fluid. When released the switch returns to the "O"
(OFF) position.
NOTE:
Do not operate the windshield washer without
any fluid. If you operate it in spite of running out
of fluid, the washer motor may be damaged.
Check level in washer tank, and add fluid as
required.
NOTE:
If you use soapy water or synthetic detergent
instead of window cleaning fluid, the wiper
blade or painted surfaces may be damaged.
Use standard window cleaning fluid: SSK703
9. Wiper Switch (Optional)
O. In this position, windshield wiper is turned "OFF."
I. In this position, wiper runs at "LOW" speed.
II. In this position, wiper runs at "HIGH" speed.
NOTE:
Operating wiper without washer fluid or when
there is sand or dirt present will damage the
window and/or wiper.
10. Heater Switch (Optional)
This switch is used to control the speed of the blower
fan used for heater.
O. In this position, fan is "OFF."
I. In this position, fan runs at "LOW" speed.
II. In this position, fan runs at "HIGH" speed.
Figure 11
HAOA740L
O
I
Figure 12
HDO2026I
O
II
I
Figure 13
BPO0310L
O