Doosan DX35Z, Руководство по эксплуатации и обслуживанию

Страница: 109 / 211

OP000470
3-19
Operation
OPERATING INSTRUCTIONS
Engine Speed Control
Engine speed can be manually adjusted using the engine speed
control lever, Increase engine speed by pulling the lever back.
Decrease engine speed by pushing the lever forward.
Work Levers (Joysticks) (ISO Style)
NOTE:
When starting work, move work levers (joysticks)
slowly and check movement of swing and front
attachment.
This equipment is manufactured using the lever configuration
described in ISO standards. Do not change valving, hoses, etc.,
that would change this standard. The boom, arm and bucket
movements and swing direction of work levers
(joysticks)
are as
follows:
Left-hand Work Lever (Joystick) (Figure 41 and Figure
42)
1. Arm dump
2. Arm crowd
3. Left swing
4. Right swing
NOTE:
The swing brake is spring applied and hydraulically
released. It is always engaged when the work lever
(joystick) is in "NEUTRAL" or the engine is shut
down.
FG007576
Figure 40
IMPORTANT
The engine speed control system has been set at the
factory and should not require adjustment as part of routine
maintenance.
FG007577
1 5
2 6
4 3
8
7
9
10
Figure 41
WARNING!
Check surrounding area before swinging. When operating a
lever while in auto idle, do it carefully, because the engine
speed will increase rapidly.
FG007578
1
2
4
3
Figure 42