Doosan DX35Z, Руководство по эксплуатации и обслуживанию

Страница: 39 / 211

OP000468
1-33
Safety
Operate Carefully on Snow, Ice and in
Very Cold Temperatures
In icy cold weather avoid sudden travel movements and stay
away from even slight slopes. The machine could skid off to
one side very easily.
Snow accumulation could hide or obscure potential hazards.
Use care while operating or while using the machine to
clear snow.
Warming up the engine for a short period may be
necessary, to avoid operating with sluggish or reduced
working capacity. The jolting shocks and impact loads
caused by bumping or bottoming the boom or attachment
are more likely to cause severe stress in very cold
temperatures. Reducing work cycle rate and work load may
be necessary.
When the temperature rises, frozen road surfaces become
soft, and machine travel becomes unstable.
In cold weather, do not touch metal surfaces with your bare
hands. If you touch a metal surface in extremely cold
weather, your skin may freeze to the metal surface.
Operations on Slopes
When working on slopes. there is danger that the machine
may lose its balance and turn over, when swinging, or when
work equipment is operated. Always carry out these
operations carefully.
Do not swing the work equipment from the uphill side to the
downhill side when the bucket is loaded. This operation is
dangerous.
If the machine has to be used on a slope, pile the soil to
make a platform that will keep the machine as horizontal as
possible.
In addition, lower the bucket as far as possible, keep it
pulled into the front, and keep the swing speed as low as
possible.
FG008060
Figure 25