Doosan DX35Z, Руководство по эксплуатации и обслуживанию

Страница: 40 / 211

OP000468 Safety
1-34
Parking Machine
Avoid making sudden stops, or parking the machine
wherever it happens to be at the end of the workday. Plan
so the excavator will be on firm, level ground away from
traffic and away from high walls, cliff edges and any area of
potential water accumulation or runoff. If parking on inclines
is unavoidable, block the crawler tracks to prevent
movement. Lower the bucket or other working attachment to
the ground, or to an overnight support saddle. There should
be no possibility of unintended or accidental movement.
Park machine so there is enough clearance between it and
other machines.
When parking on public roads, provide fences, signs, flags,
or lights, and put up any other necessary signs to ensure
that passing traffic can see the machine clearly. Park the
machine so the machine, flags, and fences do not obstruct
traffic.
After all attachments, such as the bucket and blade, have
been lowered to an overnight storage position and all
switches and operating controls are in the "OFF" position,
the safety lock lever must be set to the "LOCKED" position.
This will disable all pilot circuit control functions.
Always close the door of the operator's cabin.
Precautions for Traveling in Reverse
Backing up is potentially dangerous because of restricted
visibility.
Use a signalman when backing up.
• Watch for people nearby.
• Use horn or other signal to warn people nearby.
• Keep windows, mirrors and headlights clean and
good repair at all times.
• Slow down when visibility is poor due to dust,
heavy rain, fog, or other conditions.
Non-slip
support
Non-slip
support
FG007526
Figure 26
FG007527
Figure 27