Donaldson Torit DCE 2000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 36 / 43

Installation, Operation and Maintenance Manual
DCE 2000 Series Dust Collectors
36
speCIfICatIon
table 7 – Compressed aIr reQuIrements
a
Normal operating pressure.
b
Recommended atmospheric air volume of clean, dry compressed air.
c
Recommended initial settings; these may be varied with experience.
d
Sizes suitable for runs of pipe up to 30 m (100ft) in length; for longer runs consult with Donaldson.
For connection details please refer to Publication 2325.
1 bar = 10
5
Pa
at 18 s intervals
c
dCe f2012 3.4 bar 50 psig 3.0 m³/h 1.8 cfm 60 ms ½" NB (12)
dCe f2018 3.4 bar 50 psig 3.4 m³/h 2.1 cfm 60 ms ½" NB (12)
Minimum
Working compressed atmospheric
unit type Pulse duration pipe
air pressure
a
air volume – F.a.D.
b
diameter
d
at 12 s intervals
c
dCe f2024 3.4 bar 50 psig 7.4 m³/h 4.4 cfm 60 ms ½" NB (12)
dCe f2030 3.4 bar 50 psig 7.4 m³/h 4.4 cfm 60 ms ½" NB (12)
dCe f2036 3.7 bar 55 psig 9.5 m³/h 5.6 cfm 60 ms ½" NB (12)
dCe f2045 3.7 bar 55 psig 9.5 m³/h 5.6 cfm 60 ms ½" NB (12)
3 phase / 50 Hz
(IeC 60034-30)
230/3/50 D
400/3/50 Y
400/3/50 D
690/3/50 Y
0.75 – 1.5
nameplate details kW
2.2 and above
220-240 D
380-420 Y
380-420 D
660-690 Y
range
250-280/3/60 D
440-480/3/60 Y
440-480/3/60 D
0.75 – 1.5
nameplate details kW
2.2 and above
250-280 D
440-480 Y
440-480 D
range
3 phase / 60 Hz*
table 8 – standard fan motor supply VoltaGe detaIls
*Some motors will be fitted with a second nameplate displaying 60 Hz details
The details above may not apply to non-standard motors.
to comply with european standards the motor nameplate will display the following: