Dodge Journey 2018 Скачать руководство пользователя страница 56

Страница: 56 / 519

For comfort, the Active Head Restraints can be tilted

forward and backward. To tilt the head restraint closer to

the back of your head, pull forward on the bottom of the

head restraint. Push rearward on the bottom of the head

restraint to move the head restraint away from your head.

NOTE:

•

The head restraints should only be removed by qualified

technicians, for service purposes only. If either of the

head restraints require removal, see your authorized

dealer.

•

In the event of deployment of an Active Head Restraint,

refer to “Occupant Restraints/Supplemental Active

Head Restraints (AHR)/Resetting Active Head Re-

straints (AHR)” in “Safety” for further information.

Active Head Restraint (Normal Position)

Active Head Restraint (Tilted)

54 GETTING TO KNOW YOUR VEHICLE

Содержание Journey 2018








































































































































































































































































































































































































































































































































Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды

Dodge Journey 2018, Руководство пользователя

Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды