Dodge Journey 2018 Скачать руководство пользователя страница 34

Страница: 34 / 519

Power Door Locks

A power door lock switch is on each front door trim panel.

Use this switch to lock or unlock the doors and liftgate.

The doors can also be locked and unlocked with the

Keyless Enter-N-Go (Passive Entry) system. Refer to “Key-

less Enter-N-Go” in “Getting To Know Your Vehicle” for

further information.
If you push the power door lock switch, with the ignition

in the ON/RUN or ACC position and any front door is

open, the power locks will not operate. This prevents you

from accidentally locking the key fob in the vehicle.

Turning off the ignition or closing the door will allow the

locks to operate. If a door is open, and the ignition is in the

ON/RUN or ACC position, a chime will sound as a

reminder to remove the key fob.
Automatic Door Locks — If Equipped
The auto door lock feature default condition is enabled.

When enabled, the door locks will lock automatically when

the vehicle’s speed exceeds 15 mph (24 km/h). The auto

door lock feature can be enabled or disabled by your

authorized dealer per written request of the customer.

Please see your authorized dealer for service.
Auto Unlock On Exit
The doors will unlock automatically on vehicles with

power door locks if:
1. The Automatic Unlock Doors On Exit feature is enabled.
2. The transmission was in gear and the vehicle speed

returned to 0 mph (0 km/h).

3. The transmission is in PARK.
4. Any vehicle door is opened.
5. The doors were not previously unlocked.
6. The vehicle speed is 0 mph (0 km/h).

Power Door Lock Switch Location

32 GETTING TO KNOW YOUR VEHICLE

Содержание Journey 2018








































































































































































































































































































































































































































































































































Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды

Dodge Journey 2018, Руководство пользователя

Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды