Dodge Journey 2018 Скачать руководство пользователя страница 197

Страница: 197 / 519

WARNING!

•

Do not drill, cut, or tamper with the knee impact
bolsters in any way.

•

Do not mount any accessories to the knee impact
bolsters such as alarm lights, stereos, citizen band
radios, etc.

Supplemental Driver Knee Air Bag
This vehicle is equipped with a Supplemental Driver Knee

Air Bag mounted in the instrument panel below the

steering column. The Supplemental Driver Knee Air Bag

provides enhanced protection during a frontal impact by

working together with the seat belts, pretensioners, and

front air bags.
Supplemental Side Air Bags
Supplemental Seat-Mounted Side Air Bags (SABs)

This vehicle is equipped with Supplemental Seat-Mounted

Side Air Bags (SABs).
Supplemental Seat-Mounted Side Air Bags (SABs) are

located in the outboard side of the front seats. The SABs are

marked with a “SRS AIRBAG” or “AIRBAG” label sewn

into the outboard side of the seats.

The SABs may help to reduce the risk of occupant injury

during certain side impacts, in addition to the injury

reduction potential provided by the seat belts and body

structure.

Front Supplemental Seat-Mounted Side Air Bag Label

SAFETY

195

Содержание Journey 2018








































































































































































































































































































































































































































































































































Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды

Dodge Journey 2018, Руководство пользователя

Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды