Dodge Journey 2018 Скачать руководство пользователя страница 248

Страница: 248 / 519

Autostick
AutoStick is a driver-interactive transmission feature pro-

viding manual shift control, giving you more control of the

vehicle. AutoStick allows you to maximize engine braking,

eliminate undesirable upshifts and downshifts, and im-

prove overall vehicle performance. This system can also

provide you with more control during passing, city driv-

ing, cold slippery conditions, mountain driving, trailer

towing, and many other situations.

Operation

When the gear selector is in the AutoStick position (below

the DRIVE position), it can be moved from side to side.

This allows the driver to manually select the transmission

gear being used. Moving the gear selector to the left (-)

triggers a downshift and to the right (+) an upshift. The

current gear will be displayed in the instrument cluster.
In AutoStick mode, the transmission will shift up or down

when the driver moves the gear selector to the right (+) or

left (-), unless an engine lugging or overspeed condition

would result. It will remain in the selected gear until

another upshift or downshift is chosen, except as described

below.

•

The transmission will automatically upshift when nec-

essary to prevent engine over-speed.

•

The transmission will automatically downshift as the

vehicle slows (to prevent engine lugging) and will

display the current gear.

•

The transmission will automatically downshift to first

gear when coming to a stop. After a stop, the driver

should manually upshift (+) the transmission as the

vehicle is accelerated.

•

You can start out, from a stop, in any gear except top

gear. Tapping (+) (at a stop) will allow starting in second

gear. Starting out in second gear can be helpful in snowy

or icy conditions.

•

If a requested downshift would cause the engine to

over-speed, that shift will not occur.

•

Avoid using speed control when AutoStick is engaged.

•

Transmission shifting will be more noticeable when

AutoStick is enabled.

•

The system may revert to automatic shift mode if a fault

or overheat condition is detected.

246 STARTING AND OPERATING

Содержание Journey 2018








































































































































































































































































































































































































































































































































Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды

Dodge Journey 2018, Руководство пользователя

Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды