Dodge Journey 2018 Скачать руководство пользователя страница 61

Страница: 61 / 519

NOTE:

A single ball joint mirror is provided in the vehicle.

It is a twist on mirror that has a fixed position at the

windshield. The mirror installs on the windshield button

with a counterclockwise rotation and requires no tools for

mounting. The mirror head can be adjusted left and right

and tilted up and down for various drivers. The mirror

should be adjusted to center on the view through the rear

window.

Electrochromic Mirror — If Equipped

A single ball joint mirror is provided in the vehicle. It is a

twist on mirror that has a fixed position at the windshield.

The mirror installs on the windshield button with a coun-

terclockwise rotation and requires no tools for mounting.

The mirror head can be adjusted up, down, left, and right

for various drivers. The mirror should be adjusted to center

on the view through the rear window.
This mirror automatically adjusts for headlight glare from

vehicles behind you.
NOTE:

•

The Automatic Dimming Mirror feature is disabled

when the vehicle is in REVERSE to improve rear view

viewing.

•

The Automatic Dimming Mirror feature can be turned

on or off using the Uconnect System. Refer to “Uconnect

Settings” in “Multimedia” for further information.

Adjusting Rearview Mirror

GETTING TO KNOW YOUR VEHICLE 59

Содержание Journey 2018








































































































































































































































































































































































































































































































































Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды

Dodge Journey 2018, Руководство пользователя

Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды