Dodge Journey 2018 Скачать руководство пользователя страница 82

Страница: 82 / 519

Economy Mode

If ECONOMY mode is desired, push the A/C button to

turn off the LED indicator and the A/C compressor. Rotate

the temperature control knob to the desired temperature.

Also, make sure to select only Panel, Bi-Level, or Floor

modes.
Stop/Start System — If Equipped

While in an Autostop, the Climate Controls system may

automatically adjust airflow to maintain cabin comfort.

Customer settings will be maintained upon return to an

engine running condition.
Controlling The Rear Climate Controls From The
Front MTC Panel
The rear MTC system has floor air outlets at the rear right

side of the 3rd Row seats and overhead outlets at each

outboard rear seating position. The system provides heated

air through the floor outlets or cool, dehumidified air

through the headliner outlets.
The rear system temperature control buttons on the touch-

screen are located in the Uconnect touch system, located on

the instrument panel.
The Three-Zone climate control system allows for adjust-

ment of the rear climate controls from the front climate

panel.
To change the rear system settings:

•

Press the

⬙

REAR CLIMATE

⬙

button to change control to

rear control mode, Rear display (below) will appear.

Control functions now operate rear system.

•

To return to Front screen, press the

⬙

FRONT CLIMATE

⬙

button.

80 GETTING TO KNOW YOUR VEHICLE

Содержание Journey 2018








































































































































































































































































































































































































































































































































Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды

Dodge Journey 2018, Руководство пользователя

Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды