Dodge Journey 2018 Скачать руководство пользователя страница 260

Страница: 260 / 519

If “CLEAN PARK ASSIST” appears in the instrument

cluster display, make sure the outer surface and the under-

side of the rear fascia/bumper are clean and clear of snow,

ice, mud, dirt or other obstruction. Then, cycle the ignition.

If the message continues to appear, see an authorized

dealer.
If “SERVICE PARK ASSIST” or “SERVICE PARK ASSIST

SYSTEM” appears in the instrument cluster display, see an

authorized dealer.

Cleaning The ParkSense System

Clean the ParkSense sensors with water, car wash soap and

a soft cloth. Do not use rough or hard cloths. Do not scratch

or poke the sensors. Otherwise, you could damage the

sensors.

ParkSense System Usage Precautions

NOTE:

•

Ensure that the rear bumper is free of snow, ice, mud,

dirt and debris to keep the ParkSense system operating

properly.

•

Jackhammers, large trucks, and other vibrations could

affect the performance of ParkSense.

•

When you turn ParkSense off, the instrument cluster

display will read “PARK ASSIST SYSTEM OFF.” Further-

more, once you turn ParkSense off, it remains off until you

turn it on again, even if you cycle the ignition key.

•

When you move the gear selector to the REVERSE

position and ParkSense is turned off, the instrument

cluster display will show the “PARK ASSIST SYSTEM

OFF” message for as long as the vehicle is in REVERSE.

•

Clean the ParkSense sensors regularly, taking care not to

scratch or damage them. The sensors must not be covered

with ice, snow, slush, mud, dirt or debris. Failure to do so

can result in the system not working properly. The

ParkSense system might not detect an obstacle behind the

fascia/bumper, or it could provide a false indication that

an obstacle is behind the fascia/bumper.

•

Ensure the ParkSense system is OFF if objects such as

bicycle carriers, trailer hitches, etc., are placed within 12

inches (30 cm) from the rear fascia/bumper. Failure to

do so can result in the system misinterpreting a close

object as a sensor problem, causing the “SERVICE PARK

ASSIST SYSTEM” message to appear in the instrument

cluster display.

258 STARTING AND OPERATING

Содержание Journey 2018








































































































































































































































































































































































































































































































































Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды

Dodge Journey 2018, Руководство пользователя

Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды