Dodge Journey 2018 Скачать руководство пользователя страница 101

Страница: 101 / 519

NOTE:

In cold weather, use of recirculation mode may lead

to excessive window fogging. The recirculation feature

may be unavailable (button on the touchscreen greyed out)

if conditions exist that could create fogging on the inside of

the windshield. On systems with Manual Climate Controls,

the Recirculation mode is not allowed in Defrost mode to

improve window clearing operation. Recirculation will be

disabled automatically if this mode is selected. Attempting

to use Recirculation while in this mode will cause the LED

in the control button to blink and then turn off.
Automatic Temperature Control (ATC) — If
Equipped

Automatic Operation

1. Push the AUTO button on the faceplate, or the AUTO

button on the touchscreen on the Automatic Tempera-

ture Control (ATC) Panel.

2. Next, adjust the temperature you would like the system

to maintain by adjusting the driver and passenger

temperature control buttons. Once the desired tempera-

ture is displayed, the system will achieve and automati-

cally maintain that comfort level.

3. When the system is set up for your comfort level, it is

not necessary to change the settings. You will experience

the greatest efficiency by simply allowing the system to

function automatically.

NOTE:

•

It is not necessary to move the temperature settings for

cold or hot vehicles. The system automatically adjusts

the temperature, mode, and blower speed to provide

comfort as quickly as possible.

•

The temperature can be displayed in U.S. or Metric units

by selecting the US/Metric customer programmable

feature. Refer to the “Uconnect Settings” in “Multime-

dia” for further information. To provide you with maxi-

mum comfort in the Automatic mode during cold start-

ups, the blower fan will remain on low until the engine

warms up. The blower will increase in speed and

transition into Auto mode.

Manual Operation Override

This system offers a full complement of manual override

features. The AUTO symbol in the front ATC display will

be turned off when the system is being used in the manual

mode.

GETTING TO KNOW YOUR VEHICLE 99

Содержание Journey 2018








































































































































































































































































































































































































































































































































Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды

Dodge Journey 2018, Руководство пользователя

Результаты поиска

Содержание Journey 2018

Отзывы:

Похожие инструкции для Journey 2018

Бренды по названию

Популярные бренды