Docomo Style P-06A, Инструкция по эксплуатации, Страница: 549 / 565

32
1
Click the dial-up icon on the task tray.
2
Select “
接続または切断
(Connect or disconnect)” and click “
切断
(Disconnect)”, then click “
閉じる
(Close)”.
<For Windows XP, Windows 2000>
Click “
切断 (Disconnect)”.
If you cannot connect to network (if you fail a dial-up connection), confirm the following items:
:
This section explains how to set up a connection for the 64K data communication without using
“DOCOMO Connection Manager”.
The setting of dial-up connection and TCP/IP for the 64K data communication is the same as for the packet
communication (see page 15).
Take care of the following points:
≥
In the 64K data communication, you do not need to set an access point name (APN). For the access point of the dial-up
connection, enter the phone number of the access point specified by your Internet service provider or network administrator.
(To connect to “mopera U”, enter “
¢
8701” in the phone number field, and to connect to “mopera”, enter “
¢
9601”.)
≥
Set “caller ID notified/not notified” and “others” as required.
(When connecting to “mopera U” or “mopera”, you need to notify your caller ID.)
≥
Contact your Internet service provider or network administrator for details on the setting contents.
You can operate in the same way as for the packet communication. Perform the operations on page 14,
page 30 or page 32.
Disconnecting Communication Line
For Windows Vista
Information
≥
The communication line may not be disconnected just by exiting the browser software. To surely disconnect the communication line,
perform this operation.
≥
The baud rate displayed on your personal computer may be different from the actual one.
When you cannot connect to network
If this error occurs Confirm those:
Your personal computer
cannot recognize “P-06A” ･ Confirm whether your personal computer satisfies the operating environment (see page 3).
･ Confirm whether “FOMA communication configuration file” (driver) is installed in your personal computer.
･
Confirm whether the FOMA terminal is connected to your personal computer and powered on.
･ Confirm whether the FOMA USB Cable with Charge Function 01/02 (option) is securely connected.
You cannot connect to the
access point
･
Confirm whether the ID (user name) and password are correct.
･ When you need to notify your caller ID such as when using “mopera U” or “mopera”, make sure “184” is not
prefixed to the phone number.
･ Confirm that “ フロー制御を使う (Use the flow control)” is checked in the modem properties.
･
If you cannot connect to the access point even after confirming above, contact your Internet service provider
or network administrator for the setting method, and so on.
Set 64K Data Communication
Setting dial-up connection and TCP/IP
Connecting and Disconnecting