Docomo Style P-06A, Инструкция по эксплуатации, Страница: 48 / 565

46
Befo
re
Usi
ng
th
e Ha
nd
set
You can display the time of the specified area under the Stand-by display
clock.
1
m
Settings Clock World time watch ON or OFF
Use
M o
to select an area and press
O o
( ).
You can advance the time displayed for the overseas country you stay
and for a region of World Time Watch by one hour.
1
m
Settings Clock Summer time ON or OFF
You can set the FOMA phone to send your phone number to the called
party’s phone when dialing. Your phone number is important
information, so take utmost care when notifying your phone number.
This function is available only when the other party’s phone supports
Caller ID.
<World Time Watch>
Displaying World Time
Information
p
World Time Watch is not displayed when “Display setting”
→
“Clock”
→
“Clock
display” is set to “OFF”, or when you use the FOMA phone overseas.
p
World Time Watch is displayed on the upper side of the Stand-by display clock when
“Clock display” is set to “Largest”.
Summer Time
<Caller ID Notification>
Notifying the Other Party of Your Phone
Number
You can set whether to notify your caller ID on the network.
1
m
Service Caller ID notification
Do the following operations.
p Your phone number (own number) is stored on the UIM.
1
m
Phonebook Own number
You can press
N o
to switch the tabs.
p See page 369 for storing/displaying personal data.
+ m - 1 - 7
Set Caller ID Notification to Network
Item Operation/Explanation
Activate ON or OFF
Check setting You can check the setting contents of “Activate”.
+ m - 0
<Own Number>
Checking Your Own Number
Own Number display
Phone number tab
List tab
Information
p
In Dual Mode of 2in1, you can switch between Number A and Number B by pressing
+ O o
( ) from the Own Number display. “ ” appears for Number A, and “ ”
appears for Number B.
p
When you replace a UIM with another one (2in1 contractor
→
2in1 contractor) while
using 2in1, perform “2in1 function OFF” (see page 401) and then set “2in1 setting” to
“YES”, or perform “Auto acquire No. B” (see page 370), to acquire the correct Number
B.
When you replace a UIM with another one (2in1 contractor
→ 2in1 non-contractor),
perform “2in1 function OFF” as well to update the owner’s information to the correct
one.