Docomo Style P-06A, Инструкция по эксплуатации, Страница: 548 / 565

31
Perform the operation on page 5 to connect the FOMA terminal to your personal computer.
1
“ スタート (Start)”
1
“ すべてのプログラム (All programs)”
1
“ アクセサリ (Accessories)”
1
“ 通信 (Communications)”
1
Open “
ネットワーク接続
(Network connection)”.
2
Open the access point to be used.
Select the access point icon of the ISP name (see page 24)
you specified in “Set Dial-up Network”, then “
ネットワークタ
スク (Network task)” → “ この接続を開始する (Start this
connection)”.
Otherwise, double-click the access point icon.
3
Confirm the contents and click “ ダイヤル (Dial)”.
≥
When connecting to “mopera U” or “mopera”, you can leave the user name and password fields blank.
4
The display appears to indicate
the connecting state.
In this period, the system performs logon processing to
confirm the user name and password.
5
The connection is completed.
After the connection is completed, the message appears from
the indicator of the task bar for a few seconds.
≥
You can start the browser software to browse web pages,
use e-mail and so on.
≥
If this message does not appear, confirm the setting of the
access point again.
Making Dial-up Connection for Windows XP
Information
≥
For dial-up connection, use the FOMA terminal with the dial-up setting completed. To connect another FOMA terminal, you may need to
reinstall the FOMA communication configuration file (driver).
≥
The power consumption of the FOMA terminal increases during communication.
≥
During packet communication, the communication state appears on the FOMA terminal.
“
” (Communicating, data sending) “ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving) “ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
≥
During 64K data communication, “ ” appears on the FOMA terminal.