Docomo Style P-06A, Инструкция по эксплуатации, Страница: 270 / 565

268
1Se
g
By using the Program Guide i-
α
ppli, you can start 1Seg by selecting a
program from the program guide, book programs, and set timer
recordings. (See page 238)
1
m
1Seg Program guide
p Press
l
( ) from the display of “ Gガイド番組表
リモコン (G Guide Program List Remote-controller)” to
watch the program currently broadcast on the selected
channel.
p For details, refer to “Mobile Phone User’s Guide
[i-mode] FOMA version”.
p
When “Mail ticker display” is set to “OFF” and “Receiving display” is set to “Alarm
preferred” and you receive a mail message while watching a 1Seg program, the
Reception Result display appears. The mail message is shown in the multiwindow
even when you show it from the Reception Result display. However, the viewer
display does not appear and the audio from a 1Seg program is not output when you
show a mail message from the party whose mail address is not stored in the
Phonebook.
p When “ ” or “ ” appears, press and hold
+ c
for at least one second to switch to
viewer display and then operate.
<Program Guide i-
α
ppli>
Using Program Guide i-
α
ppli
Information
Information
p You can set the Program Guide i-
α
ppli by “Program guide key” of “Software setting”.
p When you use “ Gガイド番組表リモコン (G Guide Program List Remote-controller)”
for the first time, you need to do initial settings.
p This software program is not available when the mode of 2in1 is set to B Mode.
1Seg enables you to use the data broadcasting in addition to the video
and audio. Various information including still/moving images is available
from the site linked with TV programs.
1
Viewer display (Video Mode)
m
( )
Video Mode switches to Data Broadcasting Mode and
“
” appears.
p Audio from a 1Seg program is output even during Data
Broadcasting Mode.
p
To show the data broadcasting only, press
i
( )
from the viewer display to select “Switch display”, and
then select “Data broadcasting”.
2
Select an item (link).
p The confirmation display appears asking whether to connect to i-mode
depending on the data broadcasting and data broadcasting site.
p See page 155 for the operation while a site is displayed.
<Data Broadcasting>
Using Data Broadcasting
Information
p Each time you press
+ m
( ), Video Mode and Data Broadcasting Mode are
switched.
p You cannot display the data broadcasting on the horizontal display.
p You cannot enter pictographs when you enter characters on data broadcasting or
data broadcasting site.
p Depending on the program, the audio might be output while the i-mode site is
displayed. However, the 1Seg video is not displayed.
p Depending on the program, a tone might be output when you display the data
broadcasting or data broadcasting site. In that case, the output of the 1Seg audio
temporarily stops, and the tone of the data broadcasting is preferentially output.
p
While the data broadcasting or data broadcasting site is displayed, the confirmation
display might appear asking whether to send the contents you entered on the site or
whether to permit obtaining mobile phone information.