Docomo Style P-06A, Инструкция по эксплуатации

Страница: 241 / 565

239
i-
α
pp
li
You can select a program you want to record and set a timer recording from the program
list of this application program.
How to set a timer recording
1. Software list Gガイド番組表リモコン (G Guide Program List Remote-controller)
Highlight a program to be set for a timer recording and press
i
( )
♯ワンセグ録画予約
(1Seg timer recording)
予約実行
(Execute booking)
Operate following the instructions on the display.
(You can set a timer recording also by highlighting a program and pressing
s
.)
If you have a DVD recorder, etc. that supports the remote timer recording function, you
can set timer recordings from the program list of this application program over the
Internet even if you are away.
For remote timer recording, you need to make initial settings of this application program.
How to make initial settings
1. Set the Internet connection for the DVD recorder, etc.
(Refer to the instruction manual of the DVD recorder, etc. you use.)
2. Software list
Gガイド番組表リモコン
(G Guide Program List Remote-controller)
i
( ) リモート録画予約 (Remote timer recording)
Operate following the guidance.
How to set timer recordings
After the initial settings, specify your desired program and select “
リモート録画予約
(Remote timer recording)”. Then, the DVD recorder, etc. specified on this application
program is connected via the Internet, and you can set timer recordings.
p
You are separately charged a packet communication fee.
About timer recording function
About remote timer recording function
“iD” denotes convenient electronic money that makes use of
the credit settlement system. You can easily do shopping by
placing your Osaifu-Keitai with your credit card information set
or your credit card which supports “iD” over a scanning device
at shops. You can set up to two kinds of credit card information
on Osaifu-Keitai and can use it by shops according to specific
benefit. Depending on the card publishing company, cashing is
also supported.
p
For using “iD” on Osaifu-Keitai, you need to subscribe to a
card publishing company that supports “iD” and to set with “iD
設定アプリ (iD appli)” or card application provided by the card
publishing company. Depending on the card you use, you
need to set with “iD
設定アプリ
(iD appli)” and then set the
card application.
p The expense (annual fees, etc.) charged for the iD service differs depending on the
card publishing company.
p You cannot delete “iD 設定アプリ (iD appli)”. Before you initialize iC owner, perform “iD
アプリ初期化 (Initialize iD Application)” from “ 設定メニュー (Setting M)” of “iD 設定ア
プリ
(iD appli)”.
p For the information about “iD”, refer to the i-mode site of “iD” (in
Japanese only).
i-mode site:
i
Menu
→メニューリスト
(Menu List)
→「iD」
iD 設定アプリ (iD appli)
※ The display is for reference.
The actual one may differ.
QR code for
accessing the site