Docomo Style P-06A, Инструкция по эксплуатации, Страница: 243 / 565

241
i-
α
pp
li
“ FOMA 通信環境確認アプリ (FOMA Communication
Environment Check Application)” enables you to check
whether the FOMA phone is available at the FOMA
High-Speed Area.
p
Use “
FOMA 通信環境確認アプリ
(FOMA Communication
Environment Check Application)” with your consent to “ ご利
用の注意 (Cautions in use)”.
p
Depending on the communication environment (such as
weather, radio wave conditions, network congestion state) at
communication environment check, the different result or “out
of service” might appear even in the same area or at the
same period of time.
p You might not be able to check correctly if you use another function while using this
application program.
FOMA 通信環境確認アプリ
(FOMA Communication Environment Check Application)
※
The display is for reference.
The actual one may differ.
1
m
i-
α
ppli
i α
ppli settings
Do the following operations.
<
i α
ppli Settings>
Setting i-
α
ppli
Item Operation/Explanation
Auto start setting See page 242.
Disp. software info See page 231.
Preferred tone You can set which sound to be output preferentially, from MUSIC/
1Seg or i-
α
ppli program, for when you start an i-
α
ppli program
during music playback or use of 1Seg.
MUSIC/1Seg or
i α
ppli
α
Backlight You can set the backlight operation for when an i-
α
ppli program is
running.
Select an item.
Depend on system . . . .Follows the setting of “Backlight”.
Depend on software . . .Follows the setting of each software
program.
Constant light . . . . . . . . .Lights constantly.
α
Power saver You can set to Power Saver Mode to decrease battery
consumption by suspending the i-
α
ppli program temporarily for
when you close the FOMA phone during i-
α
ppli running.
ON or OFF
p This setting is valid from when an i-
α
ppli program starts until it
closes.
p Even when this function is set to “ON”, Power Saver Mode
becomes invalid if “Power saver” that can be set for each i-
α
ppli
program is set to “OFF”.