Docomo N-03A, Инструкция по эксплуатации

Страница: 88 / 506

86
Sound/Screen/Ligh
t Settings
Setting Sound Effect for Ring
Tones and Melodies
<Sound effect>
Use this function to get richer fuller sound when the
FOMA terminal with a Stereo Earphone Set (optional)
plays melodies, ring tones for voice/videophone call
or mail, sound effects and i-motion sound.
1
i
X “Settings” X “Incoming call” X
“Sound effect” X “Stereo&3D sound” X
“ON” or “OFF”
● What is Sound effect
It is the function uses a Stereo Earphone Set to
produce 3-dimensional and resonating sound. This
function allows you to enjoy i-
α
ppli games and
melody playback with richer and more realistic sound.
When you play an i-motion with sound effects, the
effects simultaneously enhance the sound played
through the speaker and earphones. Sound is
enhanced by effects that provide a natural-sounding
3D sound field and rich low tones as well as clearly
defined voice and music audio.
z i-motion with sound effects can be identified by the
icon shown on the movie list screen. → P.264
Setting the Vibration to Notify
You of Incoming Calls
<Vibrator>
You can set different vibration patterns to notify you
when you receive a voice call, videophone call or
mail.
1
i
X “Settings” X “Incoming call” X
“Vibrator”
X
Select an item to set the
vibration:
Select “Phone” to set the vibration for voice calls
and 64K data communication.
Select “Mail” to set the vibration for i-mode mail,
SMS and packet communication.
2 Select the vibration pattern:
Pattern 1- Pattern 3 …… Vibrates in each pattern.
When you switch the highlighted item while selecting
an item, the FOMA terminal vibrates in the
highlighted pattern.
Melody linkage …… The FOMA terminal vibrates in
a pattern matched to the melody set as the ring tone.
OFF …… The FOMA terminal does not vibrate.
■
Icons on the standby display while setting the
vibration pattern
: The vibration starts when receiving either voice
or videophone calls.
: The vibration starts when receiving either mail/
chat mail/MessageR/F.
: Both “ ” and “ ” are set.
N
z
The 3D effect differs depending on the individual. If
the 3D sound bothers you, set this function to “OFF”.
z The sound with the built-in speaker cannot be
changed by sound effect even when this function set
to “ON”.
z
When “Headset usage setting” is set to
“speaker”, this function is deactivated. When
set to “Headset only”, the function is activated.
N
z
When the vibration is set, take care that the vibration
does not move the FOMA terminal towards fire (e.g.
on a space heater) or cause it to fall off a table, etc.
z Even when “Melody linkage” is selected, the FOMA
terminal not always vibrates to the melody. When no
vibration pattern is set for the melody or when an
i-motion or Chaku-Uta-Full
®
is set as the ring tone, the
FOMA terminal vibrates in Pattern 2.
z
The FOMA terminal will vibrate to the ring tone or
beep regardless of this function's setting when
receiving an Area Mail. However, when the vibration
pattern for “Mail” is set to “OFF”, the FOMA terminal
does not vibrate when receiving an Area Mail (ring
tone).
<Vibrator priority>
z
When the vibrator settings are duplicated, the priority
is assigned as follows:
① Vibrator for Ring tone/Image (for individual)
② Vibrator for Ring tone/Image (for group)
③ Vibrator for B mode of 2in1
④
Vibrator setting