Docomo N-03A, Инструкция по эксплуатации

Страница: 354 / 506

352
Netw
ork Ser
vices
Ringtone for Number B …… Sets the receive
reaction (ring tone, incoming call screen,
illumination, vibration and answering message)
for the voice and videophone calls and mails
received on Number B (you can set the ring
tone, illumination and vibration for incoming
mail received).
Voice call (recv.), V.phone (recv.),
Mail (recv.)
• “Ring tone”: Proceed to step 2 of
“Changing the Ring Tone” on P.84.
• “Image”: Proceed to step 2 “ ■ To set
the calling/receiving display” of
“Changing the Ring Tone” on P.84.
• “Illumination”: Proceed to step 1 “Set
color” in “Setting the Flashing Mode of
the Incoming Call Lamp for Incoming
Calls” on P.97.
• “Vibrator”: Proceed to step 2 of “Setting
the Vibration to Notify You of Incoming
Calls” on P.86.
• “Answer message”: After selecting
“ON” in step 1 of “Having the Caller
Leave a Message” on P.65, proceed to
operate.
2in1 function OFF …… Sets 2in1 to OFF.
Rcv. avoid. setting …… Restricts incoming calls
individually for Number A and Number B.
Change rcv. avoid. …… Sets the Rcv. avoid.
setting for Number A and Number B.
Check rcv. avoid.
……
Checks the Rcv. avoid.
setting for Number A and Number B.
Mode link …… Sets the linkage for changing
2in1 mode and Rcv. avoid. setting. Incoming
calls only for Number A are accepted in A
mode, incoming calls only for Number B are
accepted in B mode, and incoming calls for
both mode are accepted in Dual mode.
* When the function is activated, you cannot
switch the mode with “ ” displayed.
Rcv. avoid. (abroad)
……
Sets the Rcv. avoid.
setting overseas (when Mode link is active, the
Rcv. avoid. (abroad) is disabled).
Switching phone numbers each time
when making a call
When 2in1 is set to ON and the mode is set to Dual
mode, phone numbers can be switched when making
a call.
z This function is available only on the detail screen
of “Phonebook/Received calls/Dialed calls/Redial”.
<Example: When making a call using the
phonebook>
1 Phonebook detail screen (P.75) X
u
(FUNC) X “Dial setting” X “2in1/Multi
Num.”
X
Select any item:
Number A
……
Allows calls to be made from Number
A.
Number B …… Allows calls to be made from Number
B.
N
z
When 2in1 is set to OFF, you can also perform “2in1
settings” by pressing
2
for 1 second or longer on
the standby screen.
<Mode switching>
z
You can also change mode by pressing
2
for 1
second or longer on the standby screen.
<Phonebook 2in1 setting>
z You cannot set this function to UIM phonebook
entries.
z Select “Display detail” from the function menu to
display “Phonebook detail screen” from “Phonebook
list screen” in this function.
<Standby display>
z When Change Mode is set to A mode, standby
screens are displayed according to “Display setting”.
z When set to the Kisekae Tool you downloaded, the
i-
α
ppli standby screen or the random display, the
default screen appears even when “Same as Number
A” is set.
<Disp. call/receive No.>
z Names, phone numbers and mail addresses in the
screens below will be displayed in the set color.
• In-call screen
• Dialing/Receiving screen
• Redial/Dialed calls (list/detail)
• Received calls (list/detail)
• Sent
*
/Received address record screen (list/detail)
• Chaku-moji Sent messages record screen
* : In B mode, the screen for sent addresses cannot be
displayed.
z The setting for Number A/Number B (Address A/
Address B) is referred in the screen while incoming a
call, etc. even when 2in1 is set to OFF.
<Ringtone for Number B>
z
When making the same settings to Number A and
Address A, set each item as “Same as Number A”.
z When the ring tone settings are duplicated, the priority
applies.
→
P.85
When you receive a call without caller ID on Number
B, priority is given to the “Ringtone for Number B”
setting.
N