Docomo N-03A, Инструкция по эксплуатации

Страница: 81 / 506

79
Phonebook
z You cannot set “Illumination” and “My Signal
settings” at the same time.
z
The Ring tone/Image functions are disabled when
the caller does not notify the caller ID. It is
recommended to set the “Caller ID Request”
service.
1 Phonebook detail screen (P.75) X
u
(FUNC) X “Ring tone/Image”
The “Ring tone/Image
screen” appears.
“
★
” appears next to the
selected function.
The available functions vary
depending on the item
selected in the phonebook detail screen.
■
To set this function for each group
X Group setting screen (P.74) X
u
(FUNC) X “Ring tone/Image”
2 Select the item to distinguish
Select the item from “Voice call (recv.)/V.phone
(dial/recv.)/Mail (recv.)”.
• When “Mail (recv.)” is selected, this function is
applied not only i-mode mail but SMS.
3
Select any item:
“ ★ ” appears next to the selected function.
■ To release a selected function
X Highlight the function with “ ★ ” X
o
(Reset)
The function is released and the “ ★ ” disappears.
Ring tone
*1
…… Sets ring tones to distinguish the
caller of the phone or sender of mail.
“Changing the Ring Tone” → P.84
Image
*1*2
……
Sets images to distinguish the caller
of the phone. “Changing the Display”
→
P.91
Chara-den setup
*3*4
…… Selects Chara-den to be
displayed as the substitute image for videophone
calls.
Illumination
*1
……
Sets the incoming call lamp
colors to distinguish the caller of the phone or
sender of mail.
“Setting the Flashing Mode of the Incoming Call
Lamp for Incoming Calls”
→
P.96
Vibrator
*1
…… Sets vibration patterns to distinguish
the caller of the phone or sender of mail.
“Setting the Vibration to Notify You of Incoming
Calls” → P.86
Answer message
*2
……
Changes the answer
message used when record message
*5
or quick
message starts up depending on the caller.
“Having the Caller Leave a Message”
→
P.65
My Signal
*6
…… Sorts calls/e-mail according to
sender using My Signal animation.
* If you highlight an item in the list while choosing an
animation, that animation is displayed in My Signal.
*1: You can also distinguish the incoming 64K data
communication.
*2: Available only when “Voice call (recv.)” or “V.phone
(dial/recv.)” is selected.
*3: Available only when “V.phone (dial/recv.)” is
selected.
*4: You need to set “My Signal settings” indicating the
incoming/outgoing of “Phone”, “Videophone”, “Mail/
Chat mail” (P.95) to “OFF”.
*5: You need to set “Record message” to “ON”
beforehand.
*6: You need to set “My Signal settings” indicating the
incoming/outgoing of “Phone”, “Videophone”, “Mail/
Chat mail” (P.95) to be displayed.
■ When you set Ring tone/Image
An icon appears in the phonebook detail screen
indicating that each item is set.
: Ring tone (voice/
videophone call)
: Ring tone (mail)
: Illumination (voice/
videophone call)
: Illumination (mail)
: Vibration (voice/
videophone call)
: Vibration (mail)
: Image (voice/videophone call)
: Answer message (voice/videophone call)
: My Signal (voice/videophone call)
: My Signal (mail)
: Chara-den (videophone call)
Ring tone/Image
N
z You cannot set this setting for the phonebook stored
as the secret data. Even if the setting is made for the
group, it is disabled for the phonebook entry stored as
the secret data.
z The “Mail (recv.)” setting set for a phone number is
activated when you receive an SMS or the sender’s e-
mail address is “[phone-number]@ docomo.ne.jp”.
z
Refer to the following pages for the priority when the
Ring tone/Image settings and other settings for
incoming calls, etc. are duplicated.
• Ring tone priority
→
P.85
• Vibrator priority
→
P.86
• Image priority
→
P.85
• Chara-den priority
→
P.74
• Incoming call lamp priority
→
P.97
• My Signal priority
→
P.96