Docomo N-03A, Инструкция по эксплуатации

Страница: 298 / 506

296
Data Mana
g
em
ent
Forwarding Data with Infrared
Data Exchange
<Infrared data exchange>
When you forward data by Infrared
data exchange
z Place the devices so that the Infrared data ports
are aligned on the same level and facing each
other.
z Do not move the devices until the confirmation
message about completing the exchange appears.
Also, do not place anything between the devices or
cover the Infrared data ports.
z The devices may not communicate successfully if
they are placed in direct sunlight, directly under a
fluorescent light, or close to other infrared
equipment.
Transferring one data at a time using
the Infrared data exchange
<Send/Receive Ir data>
You can exchange one data at a time with other
devices using the Infrared data exchange function.
● Sending one data
Select “Send Ir data” from the function menu of Data
list screen or detail screen. When you send the data
of JPEG, you can select High-speed Ir send (IrSS
TM
function).
<Example: To send one image>
1
My picture screen (P.264) X
u
(FUNC)
X
“Send Ir data” or “IrSS”
■
IrSS
TM
function
You can also send JPEG images by pressing
o
［
IrSS
］
in the Image list screen (P.264).
2 Set the receiving device ready to
receive
3 Direct the Infrared data port toward the
other part’s device
X “YES”
The data transmission starts.
When the data is sent, a notification message
about completing the exchange appears.
■ To cancel sending
X “NO”
■
To exit during sending
X
o
(Quit)
●
Receiving one data
1
i
X
“LifeKit”
X
“Receive Ir data”
The “Receive Ir data
screen” appears.
2 “Receive” X Direct the Infrared data
port toward the other party’s device X
Receive data from the other party’s
device
The data reception starts.
3
“YES”
When the received data is saved, a notification
message about completing the save appears.
The received data is discarded if no operation is
performed for about 30 seconds after it is
received.
■ To exit during the receiving
X
o
(Quit)
■
When you do not save the received data
X “NO”
Receive Ir data screen (P.296)
Add desktop icon → P.98
Infrared data port
Within the
range of ±15°
Appr
ox. 20cm
or less
N
z When you select “IrSS”, the sender may be completed
correctly even though the other party cannot received
the data correctly.
Receive Ir data
Function menu ¨ P.296