Docomo N-03A, Инструкция по эксплуатации

Страница: 355 / 506

353
Netw
ork Ser
vices
Cancel number …… Releases the setting and allows
calls to made according to Phonebook 2in1 setting.
OFFICEED
“OFFICEED” is a flat-rate group service provided by
the specified IMCS (Inbuilding Mobile Communication
System). You need a separate subscription to this
service.
For details, refer to the DOCOMO corporate website
(http://www.docomo.biz/d/212/) (only in Japanese).
Adding and Using Services
<Additional service>
When a new network service is added by DOCOMO,
you can add the service to the menu and use the
service.
Adding new services and response
messages
1
i
X “Service” X “Additional service”
X Select any item:
Additional service …… Adds new services.
X Highlight “<Not stored>” X
u
(FUNC) X “Add
new service” X Enter the service name X Select
any item:
You can enter up to 10 double-byte or 20 single-byte
characters for the service name.
Enter number …… Uses the number to
connect.
You can enter up to 20 digits.
Enter USSD number …… Uses the service
code to connect.
You can enter up to 40 digits.
• About the function menu of the “Additional service
screen” which appears when “Additional service”
is selected → P.353
Additional guidance …… Registers the response
messages for the commands posted from the
network when using the added network service with
“USSD” (service code).
X
Highlight “<Not stored>”
X
u
(FUNC)
X
“Add
new guidance”
X
Enter the command
X
Enter the
response message name
X
“YES”
You can enter up to 20 digits for the command and
you can enter up to 10 double-byte or 20 single-byte
characters for the response message.
• About the function menu of the “Additional
guidance screen” which appears when “Additional
guidance” is selected → P.353
Additional service screen
(P.353)/Additional guidance
screen (P.353)
Add new service
・
Add new guidance
……
Adds a
setting.
Edit …… Changes the setting.
Delete this
・
Delete all
……
Deletes one or all additional
service(s) or additional guidance(s).
Using the newly added service
1
i
X “Service” X “Additional service”
X “Additional service”
2 Select a service X
o
(Send)
N
z “2in1/Multi Num.” in the function menu cannot be
selected when the mode is set to A mode or B mode.
z When the following operations are performed, the
phone number selection screen is displayed and the
phone number to use can be selected.
• When making calls by entering phone number in the
phone number entry screen
• When using services from the special number
registered in Additional service
• When “Dialing” from the function menu in Sent/
Received address list is selected
• When using the Phone to function
• When pressing the switch on the flat-plug earphone/
microphone with switch (optional) on the phone
number entry screen
z
Dialing or AT command dialing from an external device
uses Number A for A mode/Dual mode and Number B
for B mode.
N
<Additional service>
z To use the service, enter the “number” or “service
code” provided by DOCOMO. The “number” is the
number used to connect to the service center. The
“service code” (USSD) is the code used for notifying
the service center.