DL JCPT-HD/DC Series, Руководство по обучению

Страница: 42 / 119

培训手册
Training Manual
操作
Operation
JCPT-HD/DC
www.cndingli.com
4-6

充电器故障排除；老款（
The charger fault trouble shooting
；
Old version
）
序号
No.
故障现象
Fault Description
解决方案
Solution
1
LED
灯都不亮
No LED is working
检查输入电压，如果正常更换充电器。
Check the input voltage,if good, the charger should to be
replaced.
2
三个灯同时闪烁一次
The 3 LED is flashing one
time at the same time
输出错误；检查电瓶和充电器连接是否正确。
Output fault: Check the connect from battery to charger.
3
三个灯同时闪烁两次
The 3 LED is flashing two
times at the same time
AC
电压问题；检查
AC
输入电压，充电器显示
AC
电压太
高或者太低。
AC input fault: Check the AC input, too high or too low.
4
三个灯同时闪烁三次
The 3 LED is flashing
three times at the same
time
充电器过热；不需要采取行动，当充电器降温， 充电会自
动重启。
The charger is too hot; no need any action, the charger will
be restart when the temperature come down.
5
三个灯同时闪烁四次
The 3 LED is flashing four
times at the same time
输入或者输出过电流；不需要采取行动，充电器会自动矫正
和重启。
The input or output current is too high; no need any action,
the charger will be corrected and restart automatically.