Distech Controls ECLYPSE APEX, Руководство пользователя

Страница: 87 / 171

87 ECLYPSE APEX
Figure 77: Accept the Warning
Removing a Certificate
After you hold the controller’s reset button for 20 seconds, the controller’s HTTPS security certificates
will be regenerated. If you use HTTPS to connect to the controller, you will no longer be able to con-
nect to the controller from any PC that was used in the past to connect to the controller unless you
delete the old HTTPS security certificate from these PCs.
Security certificates are managed on a PC through the Certificate Manager. To delete an ECLYPSE
controller’s HTTPS security certificate from a PC, proceed as follows.
1. On the PC, open the Certificate Manager: click Start and type certmgr.msc into the search box
and press Enter . If you are prompted for an administrator password or confirmation, type the pass-
word or provide confirmation.
2. In the Certificate Manager, navigate to Certificates - Current User\Trusted Root Certification
Authorities\Certificates . When you open this folder, certificates are displayed along with related
details in the right pane.
3. Certificates for ECLYPSE controllers are named in the following ways:
– Local ECLYPSE Authority
– Local ECLYPSE-XXXXXX Authority where XXXXXX is the controller’s MAC address. See
Controller Identification .
Backup the certificate in case it will be needed: right-click the certificate and select All
Tasks\Export .
4. Delete the certificate: right-click the certificate and select Delete .
When you connect to the controller, your browser will ask you to accept the new HTTPS security cer-
tificate.
ECLYPSE Web Interface