Distech Controls ECLYPSE APEX, Руководство пользователя

Страница: 31 / 171

31 ECLYPSE APEX
3. Draw circles to locate the ideal positions for your Wi-Fi Adapter as shown below:
Elevator
Shaft
Elevator
Shaft
U
p
D
o
w
n
Staircase
well
Up
Down
S
ta
irc
a
s
e
w
e
ll
Up
Down
S
ta
irc
a
s
e
w
e
ll
Radio Shading
Radio Shading
Radio Shading
Wi-Fi Hotspot
Channel 1
Wi-Fi Hotspot
Channel 6
Wi-Fi Hotspot
Channel 11
Figure 17: Radio Wi-Fi Adapter Location
£
Make sure that the Wi-Fi Adapter is positioned in a way such that no screens block
the connection to any corner inside the fire safety section (potential sensor positions).
£
For reliable range planning, the unfavorable conditions should be detected at the be-
ginning but often come from later changes to the environment (room filled with peo-
ple, alteration of partition walls, furniture, room plants, etc.).
£
Even after careful planning, range and signal tests should be done during installation
to verify proper reception at the Wi-Fi Adapter positions. Unfavorable conditions can
be improved by changing the antenna position or by adding a router closer to the con-
troller(s).
For reliable range planning, the unfavorable conditions should be detected at the beginning but often come from
later changes to the environment (room filled with people, alteration of partition walls, furniture, room plants,
etc.).
Even after careful planning, range and signal tests should be done during installation to verify proper reception
at the Wi-Fi Adapter positions. Unfavorable conditions can be improved by changing the antenna position or by
adding a router closer to the controller(s).
Connecting IP Devices to an IP Network