Distech Controls ECLYPSE APEX, Руководство пользователя

Страница: 61 / 171

61 ECLYPSE APEX
Diagnostics
Some controller models support up to three RS-485 ports. Some controllers only support Modbus RTU
on its RS-485 port. See the controller’s datasheet for more information.
BACnet MS/TP and Modbus RTU communications are made by connecting directly to separate
RS-485 ports. On-board RS-485 Port is the controller’s onboard RS-485 port. When an ECY-RS485
expansion module is attached to the controller, ECY-RS485 Module Port 1 is port #1 and ECY-RS485
Module Port 2 is port #2 on that module.
The following Diagnostics tab provides information on live values passing through the RS-485 ports.
By default, the live values are displayed. You can stop and restart the streaming of the live values us-
ing the Stop Live Values/Start Live Values button.
Figure 47: BACnet Diagnostics
User Management
User management is the control of who can access the controller by enforcing the authentication cre-
dentials users need to access the controller. User management can either be managed in
Server or
Client
mode. You can also set the Welcome page a user will land on when they connect to the con-
troller.
An ECLYPSE controller can manage users through several mechanisms. It can either be in
Server
mode that provides a user database to other ECLYPSE controllers and itself, or in Client mode for ac-
cess to a remote user database.
You can provide appropriate privileges to users depending on the clearance level desired for each
role. You can also modify user properties and customize the user experience by assigning a Welcome
page to each user.
Server/Client User Configuration
When you configure an ECLYPSE controller in server mode, you can add new users, select their
roles, and choose their custom Welcome page. This page will be the default page displayed after a
user logs in to an ECLYPSE controller.
If you configure an ECLYPSE controller in client mode, you can only choose the Welcome page dis-
played to a user. Any other information will be retrieved from the remote server. The Welcome page
chosen in client mode has priority over the one configured in the server.
ECLYPSE Web Interface