111
ECLYPSE APEX
7. Set the hotspot’s IP address that wireless clients will connect to in
Ip Address
. Ensure that this ad-
dress is:
– Not in the range of IP address set by
First Address
and
Last Address
.
– Not the same as the
IP address
set under IP Configuration for the wired network.
8. Set the hotspot’s subnet mask in
Subnet Mask
9. Set the hotspot’s addressing range in
First Address
and
Last Address
. This defines the range of
IP addresses to be made available for hotspot clients to use. The narrower the range, the fewer
hotspot clients will be able to connect due to the lack of available IP addresses. For example, a
range where First Address = 192.168.0.22 and Last Address = 192.168.0.26 will allow a maximum
of 5 clients to connect to the hotspot on a first-to-connect basis.
10. Under
Advanced
, set the
Channel Number
, and
Wi-Fi Mode
. See
explanation of these parameters.
11. Click
Apply
.
Configuring the ECLYPSE Wi-Fi Adapter Wireless Networks
Содержание ECLYPSE APEX
Страница 1: ...User Guide ECLYPSE APEX...
Страница 171: ...ECLYPSE APEX_UG_11_EN...
