t
Reflex Duplicator Manual
- 67 -
Menu Overview:
1. COPY
This menu will guide you to make CD/DVD copies. Before
you enter this menu to copy, please make sure you have
selected the correct Master Reading Source. For more
information, please refer to “Tutorial Guide I ñ Make Disc-to-
Disc Copies“ or “Tutorial Guide II ñ Make Hard Drive(HDD)-
to-Disc Copies“
2. ADVANCED
COPY
OPTIONS
2.1 Test and Copy - This menu will guide you to perform the
simulation of copying process and if everything has
passed during the simulation, a real copying process will
be performed. If thereís an error encountered during the
simulation, an error message will be displayed and the
copying process will not be initiated.
2.2 Copy and Compare - This menu will guide you to make
copies for you and after the copy process has been
finished, it will perform an additional comparison process
automatically to ensure data correctness.
2.3 Copy and Verify - This menu will guide you to perform
Disc Readalibility Check. This operation will check the
readiblity of your mater discs and the copied discs. The
purpose to perform this verify operation is to ensure all
of your copies are readable.
3. IMAGE
3.1 Choose Partition ñ Select a previously stored Hard Drive
Image to copy.
3.2 Load Partition ñ Load partitions to the duplicators Hard
Drive
3.3 Rename Partition ñ Rename previously stored Hard
Drive images
3.4 Delete Partition ñ Delete images stored on your hard
drive
t
Reflex Duplicator Manual
- 68 -
3.5 Partition Info ñ View details of stored images such as
name, file size, and disc type.
3.6 Partition Size ñ Turn on automatic partitioning or set
static sizes of partitions to 1GB, 5GB, or 9GB.
3.7 Select Loading Drive ñ See drive port used to read
masters
4. AUDIO
4.1 Copy - This menu will guide you to make CD copies.
Before you enter this menu to copy, please make sure you
have selected the correct Master Reading Source. For
more information, please refer to “Tutorial Guide I ñ Make
Disc-to-Disc Copies“ or “Tutorial Guide II ñ Make Hard
Drive(HDD)-to-Disc Copies
4.2 Edit Track To:
4.2.1 Blank
CD
-
create an audio compilation disc
4.2.2 Hard
Drive
-
create an audio compilation hard
drive image.
5. SETUP
5.1 Select Burn Speed - This menu will guide you to adjust
the duplication speed on various duplication modes. For
more information, please refer to “Tutorial Guide III ñ
Select the Duplication Speed“
5.2 Select Source - This menu will guide you to set the
Master Reading Source. For more information, please
refer to “Tutorial IV - Select the Master Reading Source“
5.3 Read Skip Error - Normally, when the duplicator
encountered a reading error while reading your master
disc, all the duplication will be aborted and all the
recordable media will be ruined. However, if you believe
that your master disc has a small, insignificant error due to
physical damages, you can enable the setting to allow the
duplicator to skip any read error* it has encountered.
5.4 CD Writing Mode - This setting will allow you to select
which mode you would like to duplicate a CD. There are
