t
Reflex Duplicator Manual
- 69 -
two different modes, “Disc at Once“ and “Track at
Once“. Unless you understand completely what they
mean, we strongly suggest you to set it as “Disc at
Once“.
5.5 Max Audio VCD and CDG Speed - Audio CDís and
Video CDís do not have internal error checking capability,
so duplicating at too high a speed may cause frequent
errors. This setting will allow you to adjust the maximum
duplication speed for Audio and Video CD
5.6 Auto Copy - This option will allow you to enable/disable
the AutoCopy feature by turning this feature ON or OFF.
The AutoCopy function allows you to copy from Disc to
Disc automatically without pressing any keys. To learn
more about this function please refer to “Tutorial Guide
XIII ñ Using AutoCopy“
5.7 DVD+R High Compatibility Mode -This feature will
allow you to enable/disable the DVD+R High
Compatibility Mode feature by turning this feature ON
or OFF. The purpose of this feature is to increase the
compatibility of DVD+R media with a broader range of
DVD Video players. This process will increase the
amount of time required to duplicate your disc(s).
5.8 Display and Sound Settings
5.8.1 Buzzer
-
This setting will allow you to choose
whether you want to hear a beep when you press a
button or when a task has been completed.
5.8.2 Start Up Menu - This setting will allow you to
choose which menu you would like to see first
when you turn on the duplicator
5.8.3 Screen Saver - . By enabling this feature, a
screen saver will be displayed when your
duplicator has been idle for a long period of time.
5.8.4 Language
-
This setting will allow you to
choose which language you prefer to navigate this
duplicator. Current supported languages are
Spanish, English
t
Reflex Duplicator Manual
- 70 -
5.9 Counter - This option will allow you to enable/disable
the Counter feature by turning this feature ON or OFF.
This feature will notify you how many discs have been
copied and how many discs are left to go.
5.10 Duplication Mode - To simplify Hard Drive loading and
copying process for anyone, we introduced a new
feature called “Load and Copy“ in addition to “On the
Fly“ under the new category “Duplication Mode“. For
more information, please refer to “Tutorial Guide XII -
Introduction to Duplication Mode“
5.11 Auto Start - This setting will allow you to choose Auto,
Full or Off. When it is Full, This feature will allow the
duplicator to copy automatically once your master disc
and all of the writer trays of the duplicator are fulfilled
with recordable media. When it is Off, the copy process
requires you to press “ENT“ button to confirm the
duplication. When it is Auto, if your duplicator has
detected 3 blank discs on a 4 target or higher duplicator
for example and didnít detect any additional blank discs
for 30 seconds, then the duplication will be started
automatically. However, in order for this feature to take
effect, you need to be inside the operation menu such
as COPY, TEST, TEST+COPY, and COPY+COMPARE
5.12
Load Default - This function will reset all of the
options back to manufactureís default. You can
perform this function if your duplicator is acting
abnormal
6. UTILITIES
5.1 Disc Info - If you are uncertain about the type of blank
recordable media you are using, the duplicator is
equipped with the disc info function to help identify and
notify you of the disc information encoded within
5.2 Prescan - Approximately 50% of failures reported by our
duplicator are caused by errors in the master disc which
our Reader couldnít overcome. When this kind of failure
