t
Reflex Duplicator Manual
- 29 -
Then you will be directed back to the menu:
After loading your master disc to the Hard Drive,
please make sure to remove your master disc from
the Master Reading Tray. Failure to do so might
cause improper duplication.
NOTES
SetUp
5.2 Select Source
t
Reflex Duplicator Manual
- 30 -
Tutorial Guide:
V.
Load Master Disc onto the Hard Drive
In order to copy from the Hard Drive, you are required to load
your master disc onto a hard drive partition.
The number of partitions is determined by dividing your Hard
Driveís total capacity by 1GB for CD format, 5GB for DVD-5
format or 9 GB for DVD-9 format (Double Layer) and subtracting
one partition for system use.
For example, if you have a 40GB Hard Drive, you can calculate
the number of DVD-5 format partitions by: 40 / 5 = 8. Since there
is 1 partition reserved for the system use, you will have 7
partitions to use.
To load your master disc onto a hard drive partition, please do
the following:
1. Make sure the Master Reading Source is set to the Hard
Drive.
It is very important to make sure the Master Reading Source
is set for the Hard Drive in order to avoid unnecessary error
messages. To check the Master Reading Source, please do
the following:
a. Use UP / DOWN, “ENT“/ “ESC“ buttons or
“Source“ hot key to navigate to the following
screen.
b. Press “ENT“ to enter Select Source Menu and you
shall see the following:
Setup
5.2 Select Source
