t
Reflex Duplicator Manual
- 31 -
Make sure it is located at “Hard Drive“. If not, then
you need to press UP or DOWN navigation button
to search for it.
c. Press “ENT“ to submit your selection. After your
selection has been submitted, you will see the
following:
2. Load your master disc onto the Hard Drive.
a. Use UP / DOWN, “ENT“/ “ESC“ buttons or
“Load“ hot key to navigate to the following screen.
b. Press “ENT“ to. enter Load Partition Menu and you
shall see the following:
Setup
5.2 Select Source
Hard Drive Port 0
WDC WD400EB-75CPF0
Image
3.2 Load Parition
Load Partition [ 1/ 8]
Load->New Partition
t
Reflex Duplicator Manual
- 32 -
c. Now, you have a choice to load your master disc
into a new (empty) partition or overwrite one of the
existing partitions if any exists. You can simple
press UP or DOWN arrow button to select your
partition and press “ENT“ to submit. You will see
the following:
d. Now, you can name the partition you are about to
load into the Hard Drive. To enter the name, you
need to use UP or DOWN button to select the
character and use “ENT“ or “ESC“ button to move
the cursor position and once youíve finished, move
the cursor to “OK“ and press “ENT“. For example,
if I want to name the partition of your master disc
as “FUN“. Then do the following:
Make sure the cursor is located at the first
position:
ix.
Press “DOWN“ button consecutively until “F“ is
displayed.
Edit Partition Name
[x ] OK?
Edit Partition Name
[ ] OK?
*The “1” indicates the number of partitions
you’ve already loaded into the Hard
Drive .
(Includes the Reserved Partition)
*The “8” indicates the total number of partitions
you can load to the Hard Drive.
