t
Reflex Duplicator Manual
- 23 -
If you happen to have any failed discs (bad copy),
the failed disc(s) will not be ejected automatically.
You need to manually eject them and throw them
away if they are write once recordable disc(s).
NOTES
t
Reflex Duplicator Manual
- 24 -
Tutorial Guide:
III.
Select the Duplication Speed
This process will allow you to adjust the duplication speed
subject to your various needs.
By default, the duplication speed will be set to the optimal
speed. However, under some circumstances, you might want
to lower the duplication speed. Those circumstances are as
follows:
•
Blank Media Compatibility ñ When your media
compatibility is not good, lowering the duplication
speed is necessary to make good copies.
•
Poor Master Disc Quality ñ If your master disc
condition is not good, lowering the duplication
speed will reduce failure rates.
•
Duplication Quality ñ The lower the burn speed, the
higher the quality of your duplicates. When you have
time, it is a good choice to lower down the speed to
produce the best quality duplicates.
When you turn on your duplicator, after it has booted up, you
should see the following signifying your duplicator is ready.
1. Navigate to Speed Selection Menu.
Press UP or DOWN arrow button to navigate to the
following screen.
Disc Makers .99
1. COPY
