background image

56

Operating instructions 

 DINO 120T 

 120TB

8. 

ROUTINE MAINTENANCE DURING OPERATION

The maintenance operations, that are the responsibility of the operator, are described in this 

chapter. 

The more demanding maintenance operations that require special skills, special tools or 

specific measurements and adjustment values are instructed in the separate Maintenance 

Instructions. In such maintenance and repair cases, the operator shall contact an authorized 

service provider, the distributor or the manufacturer. 

Make sure that all the service and maintenance procedures of the lift are performed in time 

and according to the given instructions.

DANGER

WARNING

CAUTION

NOTICE

Any such faults, observed during operation or periodic service, which affect the operational 

safety of the unit, must be repaired before the lift is used next time.

Keep the lift clean. Clean the lift especially carefully before services and inspections. 

Impurities may cause serious problems, for example, in the hydraulic system.

Use original spare parts and consumables. Consult the spare parts list for more detailed 

information about the parts.

The first service after 20 hours of operation

• 

change the pressure filter element

• 

adjust the brakes according to the instructions (see point “Wheel brakes and bearings”)

•  check the wheel bolts for tightness after about 100 km of driving

• 

Changing the power pack (option) oil.

If the lift is operated under demanding conditions (in exceptionally humid 

or dusty environment, corrosive climate, etc.) the intervals between the 

oil changes and the other inspections shall be shortened to meet the 

prevailing conditions in order to maintain the operational safety and 

reliability of the lift.

The timely performance of the periodic servicing and the inspections 

is absolutely mandatory, because neglecting them may impair the 

operational safety of the lift.

The guarantee will not remain valid, if the servicing and the periodic 

inspections are not performed.

Содержание DINO 120T


































































Отзывы: