Dinolift DINO 120T, Руководство по эксплуатации, Страница: 32 / 65

32
Operating instructions
•
DINO 120T
•
120TB
5.1.3. Starting up
POWERED BY AC-SUPPLY 120T
While the mains voltage is plugged in, the operating voltage of 12 VDC is supplied by a
power source.
• connect the mains cable to the power supply
• with the electric motor at maximum load, the voltage must be 230 VAC (-10%/ +6%), the
frequency 50 Hz, and rating of the fuse 10A (the length of the connecting cable has some
effect)
To access the operating controls, open the cover of LCB centre on the turning device.
1. Turn the selector switch Q1 to position LCB – chassis control centre.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
2. Start the engine by depressing the button 2 (green).
1 2
3 4
POWERED BY BATTERY 120TB
1. Switch on the main switch.
2. Turn the selector switch Q1 to position LCB – chassis control centre.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
3. Depress the start switch at the outrigger control unit.
OR
4. Start the operation. Selecting the movement speed will start the
engine automatically.