Dinolift DINO 120T, Руководство по эксплуатации

Страница: 49 / 65

49
FAULT REMEDY
3. None of the boom movements is operational, although the electric motor is running
and the selector switch stands in the correct position (operation either from the
chassis control centre or the platform control centre)
Green signal light for outriggers is not
illuminated.
Make sure that the outriggers are steady
supported on the ground, and the tyres are off the
ground.
4. Outriggers do not move
The boom is not resting on the transport support. Drive the boom onto the transport support.
The selector switch is in the wrong position.
Turn the selector switch to the
correct position.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
The limit switch on the boom support has not
closed.
Drive the boom onto the transport support.
18. Driving device is not operational, although the selector switch is in the correct
position
Boom is not resting on the transport support. Drive the boom onto the support.
24. Wheel brakes overheat
Parking brake not completely released. Release the parking brake completely.
25. Ball-coupling is not locked
Inner parts of the ball-coupling dirty. Clean and lubricate.
Tow-ball of the towing vehicle too large.
Make sure that the towing ball of the towing
vehicle is the right size for the lift's tow hitch.
According to DIN74058, the diameter of the ball
must be max. 50 mm and min. 49.5 mm.
In all other fault conditions, the lift must be submitted to a qualified DINO service
provider.
To avoid malfunctions
• Follow the operating instructions
• Beware of dangerous situations, which can damage the lift
• Keep the lift clean and protect it against moisture