Dinolift DINO 120T, Руководство по эксплуатации, Страница: 36 / 65

36
Operating instructions
•
DINO 120T
•
120TB
5.2.2. Operating the lift from the platform control centre
1. Turn the selector switch to the position ”Platform control centre
UCB”, and remove the key. Do not lock the protective cover for the
chassis control centre.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
The engine is stopped by turning the switch Q1 to the position UCB.
When operating from the platform control centre, the engine will start
and stop automatically.
2. Step onto the platform and fix the safety harness to the intended
attachment point.
3. Start using the lift normally. Operate the movements of the boom and
the platform as follows:
Koko 195x198mm
Nimike 4CB4101
Logo päivitetty 30.1.2015 VR
Jänis, kilppari ja torvi päivitetty 19.2.2016 LKö
4CB4101
Select the movement speed using the speed selector switch. Selecting
the movement speed will start the engine automatically.
Koko 195x198mm
Nimike 4CB4101
Logo päivitetty 30.1.2015 VR
Jänis, kilppari ja torvi päivitetty 19.2.2016 LKö
4CB4101
Operate the boom using the control levers.
Whenever possible, keep the boom short while lifting and lowering the
platform.
Koko 195x198mm
Nimike 4CB4101
Logo päivitetty 30.1.2015 VR
Jänis, kilppari ja torvi päivitetty 19.2.2016 LKö
4CB4101
Operate the telescope using the control lever.
1 2
3 4
1 2
3 4
As necessary, correct the position of the work platform using the lever
switch.
Note! The movements of the boom and the platform will stop as soon as the speed
selector switch or the selector switch for the movement is released.
Once the speed selector switch is released, the engine will stop after a delay of 4
seconds. Selecting the movement speed will start the engine automatically.
4. With the boom slightly lifted and the telescope extended, make sure that the platform
does not lower by itself while the operating controls are not being used.
5. Drive the platform to the work object.
DANGER
WARNING
CAUTION
NOTICE
The lift itself, the buildings around it and other obstructions constitute a risk of getting
squeezed. Hands and legs must be kept inside the work platform while the platform is
moving. Also beware of any obstacles above the platform.
IF THE SAFETY DEVICES OR THE EMERGENCY DESCENT SYSTEM ARE NOT
WORKING, HAVE THEM REPAIRED BEFORE OPERATING THE LIFT.
If several control levers are operated simultaneously, only the movement with the least
resistance will operate.